Roof Source FacebookRoof Source Twitter

CHEMLINK

Phone: 269-679-4440

www.chemlink.com

CHEMLINK Featured Roofing Products

CHEMLINK – Chem Link formulates and manufactures high-performance adhesives, sealants and warranted roof penetration seals, coatings, and related products.  Our products are based on proprietary formulations that combine the highest possible field performance with the least amount of risk to the environment and human health.

E-Curb™ System Steep Slope Penetration Seals

Product Description

CHEMLINK E-Curb

E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and pourable sealants.Chem Link's E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment.

E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around solar panel mounts, HVAC, Electrical, and any type of structural supports. TPO Primer is required for use with TPO.

When installed properly, this system forms a durable, waterproof rubber seal around penetrations. An extended warranty against leaks is activated with submittal of a completed warranty card.

M-1® Structural Adhesive/Sealant

Product Description

CHEMLINK M-1

M?1® is a moisture curing, polyether adhesive sealant designed for applications in damp, dry, or cold climates. M?1® is solvent free and contains no isocyanates. M?1® will not shrink upon curing, will not discolor when exposed to UV light, and can not "out-gas", or bubble on damp surfaces as urethane sealants often do. M?1® is capable of joint movement in excess of 25% in both compression and extension. M?1® can be used effectively in many difficult construction site conditions such as wet or dry climates and at temperatures as low as 32°F (0°C).

Duralink Super Adhesion Sealant

Product Description

CHEMLINK DuraLink

DuraLink is an extremely elastic moisture curing sealant designed for use in metal architecture, curtain wall construction and joints subject to movement. DuraLink's adhesion to difficult surfaces permits its use on anodized metal and coatings such as Kynar 500® PVDF. DuraLink will not stain absorbent stone substrates like limestone or marble. DuraLink's unique polyether chemistry eliminates out-gassing on green concrete and protects against "sun tanning" or discoloration when exposed to ultraviolet light.

NovaLink Elastomeric Joint Sealant

Product Description

CHEMLINK

NovaLink is a moisture curing, polyether, elastomeric joint sealant designed for application in damp, dry or cold climates. NovaLink is solvent free and contains no isocyanates. NovaLink will not shrink upon curing, will not discolor when exposed to UV light, and can not "outgas" or bubble on damp surfaces as urethane sealants often do. NovaLink has excellent adhesion to most construction materials and resilient elastomeric properties. NovaLink is capable of joint movement in excess of 35% compression and extension. Because it cures in wet or dry climate conditions and at low temperatures 32°F (0°C), NovaLink can be used effectively in many difficult construction site conditions.

KnuckleHead Mechanical Supports

KnuckleHead Mechanical Supports

Loose-laid wood block sleepers deteriorate as a result of freezing, thawing, UV exposures and biological attack. Metal brackets corrode and screws back out. Movement, dirt and disintegrating wood create "rot spots" and often lead to premature death for properly installed roof membranes.

KnuckleHeads install quickly with tough M-1® structural adhesive/sealant.

Visit site

In the News

El Niño pattern could emerge by 2018-19 winter

El Niño pattern could emerge by 2018-19 winter
By Roof Source on Jul 19, 2018 at 10:32 PM

Read more...